Digidash

Standard Display

Programmerbar Speed Display
Programmerbar varvtals Display
Programmerbar Shift Lights
Vatten temperatur
Olje temperatur
Olje tryck
Bränslemängd
Timtid på motor
Aktuell tid och datum
Accelerations Timers
Väglagligt ej resetbar Mätarställning
Trip Distance Timer, Räknare and medel hastigts uträknare
5 varnings lampor
1 inställningsbar varningslampa
6 Programmerbar varnings Alarms
MPH / Km/h valbar hastighet
Display i °C/°F/PSI/BAR
10 min Data Record för Analys
Justerbar Brightness och Contrast
3M Anti-reflective filters
Anodised Aluminium Case - Black or Silver

Delar som ingår i Standard System

Hastighets givare
Vatten temp givare 1/8”NPTF
Olje temp givare 1/8”NPTF
Oljetrycks givare 1/8”NPTF
Bränslegivare ( av armtyp)
Kompletts kabellhärva
USB / Serial Port Adapter
DigiTools Data Analysis software på CDROM
Quick Start / Manual / How to Guides

Standard Features Summary

The DD2-LITE display indicates real time information on all key vehicle parameters and is designed to replace all dashboard instrumentation with one compact, light-weight unit.

Primarily designed for road and track day use, the DD2-LITE displays the following parameters: speed; rpm; engaged gear; water temperature; oil temperature; oil pressure; battery volts and fuel level.

In addition, the system also includes: 11 programmable rpm shift lights; 5 key warning lights; 1 one configurable warning light; as well as peak value recall on all parameters; a road legal odometer; a trip distance counter / timer / average speed indicator and a real time clock that shows both time and date. Programmable alarms allow you to preset alarm levels and leave the task of monitoring temperatures and pressures to the DigiDash system, enabling you to get on with the job of driving the vehicle.

Selection of LCD Screen Displays

An example selection of the displays available on the LCD Menu alone are shown below. In normal use these are selected and cycled through using Button A.

Please note that the screens shown below are a selection and not the complete number of screens..........

Water Temperature, Oil Temperature and Oil Pressure are shown on this screen. You can configure this LCD screen to also display Speed and Engaged Gear if desired (as shown in the above picture).

The LITE has an Odometer (user selectable for Miles or kilometers), Battery Voltage and Fuel Tank Level (indicated as a % remaining in the fuel tank) as shown on this LCD screen.

This screen shows RPM, Speed and Engaged Gear. The Gear indicator will show C for Clutch Down, N for Neutral (Bike engines), and 1st, 2nd ,3rd, 4th, 5th and 6th.

The DD2-LITE will store maximum recorded values for the following parameters: water temp; oil temp; oil pressure; speed; rpm and battery volts.

These values are stored indefinitely until the user either manually resets them, or configures the DigiDash to reset all max hold values on power-up.

The Red LED Display

The centre RED, 3-digit LED display shows the following parameters RPM, Speed, Gear and is the main display for the programmable warning alarms. The alarms will automatically overide this display should the monitored values fall outside preset limits. The LED display is selected / cycled by pressing button B.

SPEED (Selectable between MPH OR KM/H)

The decimal point (as shown) can be configured to indicate that the unit is recording data (LITE Mini-Log Option and DD2-PRO ONLY). This can be turned on or off as desired.

RPM

The engine revolutions per minute are indicated in 100 rpm increments.

Engaged GEAR

Once you have entered your gearbox ratios and set up the RPM and Speed inputs, the Digidash accurately calculates what gear you are in.

Coolant Temperature Alarm - You can preset the temperature above which the Alarm will operate. The DigiDash 2 will monitor the engine coolant temperature and if this rises above your preset level, the CTA Alarm will be displayed.

"Hard" Oil Pressure Alarm - The letters O.I.L. will be displayed if the mechanical switch on the oil pressure sensor (either ETB's sensor supplied with the package or the original engine oil pressure switch) is activated. The Alarm trigger point on the ETB sensor is fixed at 7.5psi or 0.5 BAR.

"Soft" Oil Pressure Alarm - The DD2 range have a built-in oil pressure monitoring system. The user can preset the oil pressure level below which the OPA Alarm activates. In addition this can be combined with RPM values. OPA is displayed to distinguish it from a mechanical (Hard) activation.

Oil Temperature Alarm - You can preset the temperature above which the Alarm will operate. The DigiDash 2 will monitor the engine oil temperature and if this rises above your preset level, the OTA Alarm will be displayed.

Fuel Level Alarm - User pre-defined level of fuel remaining in the tank, below which the FLA Alarm will be displayed.

Programmable Shift-Lights

The DD2 LITE enables you to program the shift-lights to match your vehicles engine.
The RPM point at which the main RED LED illuminates can be specified, along with the shift-left delta.

The shift light delta is the increments in RPM that each LED illuminates. For example you can program the LED's to illuminate in 100, 200 or 500 rpm steps.

Sensors and harnesses included

The system comes complete with the following sensors: hall-effect speed sensor; coolant temperature; oil temperature; oil pressure and fuel level (float-arm type). The LITE is very simple to install and comes complete with wiring harnesses that considerably reduce the number of connections usually required with stand-alone gauges.

Configuration of the unit to match the vehicle can be done manually using the display or by programming the unit via the software supplied using a laptop computer. The wiring harness incorporates a serial port for programming and for those laptops with only USB ports available, a serial/USB adapter is included as standard.

Additional Standard Timers

The DD2-Lite includes an engine hour counter which is very useful for planning service intervals and monitoring overall engine usage.
The acceleration / deceleration timer is programmable in that the start and stop speeds can be preset, thus allowing you to test the vehicle’s performance (such as 0-60 times or 30 to 50 times for example) before and after any engine or vehicle modifications.
A trip distance counter is included that can be reset to record individual journey distances. This is coupled with a trip timer, which until manually reset records the total elapsed time of your journey and from these two parameters your average speed is displayed.

Mini-log Data Record

Incorporated with the standard package is the mini-log data record feature. From a choice of four parameters, namely speed, rpm, distance or oil pressure, the DD2-Lite can record the last 10 minutes (approximate) of data on one channel.

This can be then downloaded to a laptop computer for analysis using the software supplied. This is especially useful should you wish to check your oil pressure readings or analyse your speed trace over a set course.

PRIS 9995:- inkl moms